Shop by Department
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
Porterfield
Red Line Synthetic Oil > Additives
 
Part No. Search    
      
 
 
Total Record(s) - 13 ( page 1 of 1 ) [ 1 ]
 
     
 
70802
70802
 
 
85 Plus Diesel Fuel Additive - Bottle
12oz Bottle.
Designed for use in all diesel engines - compensates for latest low-sulfur fuels Diesel Fuel Catalyst and 85 Plus are products with the same chemistry.
Promotes better fuel combustion and fuel system lubrication Provides faster ignition, reduced detonation and smoke, improved efficiency.
Powerful high-temp detergents to clean fuel injectors.
Lubricates O-rings and seals to increase injector pump life, reduces ring friction.
Contains cetane booster for added power benefits.
Available in winterized formula, reduces pour point of typical fuel by 25F.
Use one bottle per tank-treats up to 100 gallons.
Click For Details
 
 
80401
80401
 
 
CV-2 Grease - Jar
14oz Jar.
Outperforms the best conventional or synthetic greases and lubes.
Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints.
Excellent high-temp stability, extreme-pressure protection, and water resistance.
Used in a variety of applications with operating temps from -100F to 500F.
Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals.
Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment.
Synthetic fluidity allows increases in bearing life up to 200%.
Will darken after high-temp use-not detrimental to performance.
Click For Details
 
 
80402
80402
 
 
CV-2 Grease - Tube
14oz Tube.
Outperforms the best conventional or synthetic greases and lubes.
Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints.
Excellent high-temp stability, extreme-pressure protection, and water resistance.
Used in a variety of applications with operating temps from -100F to 500F.
Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals.
Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment.
Synthetic fluidity allows increases in bearing life up to 200%.
Will darken after high-temp use-not detrimental to performance
Click For Details
 
 
70102
70102
 
 
Diesel Fuel Catalyst - Bottle
12oz Bottle.
Designed for use in all diesel engines - compensates for latest low-sulfur fuels.
Diesel Fuel Catalyst and 85 Plus are products with the same chemistry.
Promotes better fuel combustion and fuel system lubrication.
Provides faster ignition, reduced detonation and smoke, improved efficiency.
Powerful high-temp detergents to clean fuel injectors.
Lubricates O-rings and seals to increase injector pump life, reduces ring friction.
Contains cetane booster for added power benefits.
Available in winterized formula, reduces pour point of typical fuel by 25F.
Use one bottle per tank-treats up to 100 gallons.
Click For Details
 
 
80213
80213
 
 
Diesel Water Wetter
Designed for heavy-duty diesel engines which use more than 33% antifreeze or a supplemental corrosion package
Similar properties and benefits to regular WaterWetter, but lacks rust and corrosion inhibitors
Diesel road cars and light trucks (equipped with Cummins, Duramax, and PowerStroke engines) should use regular WaterWetter to ensure proper rust and corrosion protection
Typical diesel commercial vehicle requires one bottle, treats up to 15 gallons
Click For Details
 
 
81403
81403
 
 
Engine Oil Break-In Additive
1-16oz Bottle,Provides conventional motor oils with antiwear additives like zinc and phosphorus (ZDDP) necessary to protect against camshaft and valvetrain damage on break-in .
Allow pistons rings to seat properly with less-slick oil, while antiwear additives protect other engines components to avoid excessive wear.
Can also be used in conventional and synthetic oils during regular operation, providing an extra package of protection otherwise not found in most motor oils.
16oz bottle treats up to 12 quarts of motor oil--in many cases, one bottle can serve two engines or oil changes
Click For Details
 
 
60302
60302
 
 
Fuel Sys Water Remover

Removes water from diesel or gasoline systems, treats up to 250 gallons
Significantly reduces the freezing point of water in the fuel system
Also provides excellent fuel lubrication
Can be used in combination with SI-1 Complete Fuel System Cleaner, Diesel Fuel Catalyst, and 85 Plus
Click For Details
 
 
60202
60202
 
 
Lead Substitute
Prevents valve seat damage in engines designed for leaded gasoline
Prolongs the useful life of older engines without updated valve seats
Also cleans carburetor deposits and injectors, safe for catalytic converters.
For racing, marine, or off-road use only 1oz treats up to 10 gallons
Click For Details
 
 
30404
30404
 
 
Power Steering Fluid - Bottle
1 qt Bottle.
Improved wear protection, resists thermal breakdown, evaporation and foaming.
Provides continued high pump output, suitable for most power steering units.
Lightweight fluid avoids power losses.
50% greater high-temp viscosity and 1/5 of the high-temp evaporation.
Greater heat resistance helps to prevent boil-over.
Helps to prevent high-temp steering fade and difficult effort steering at low temps.
Compatible with petroleums and synthetics.
1/4 of the oxidation of petroleum power steering fluids.
Helps prevent leakage and squealing.
Click For Details
 
 
70303
70303
 
 
RL-2 Diesel Additive

Our most concentrated diesel product, popular for semis, agricultural, fleet tanks
Cleans and lubricates injectors, pumps, and rings, improving efficiency up to 5%
15oz treats up to 300 gallons, gallon treats up to 2560 gallons, 5 gl treats up to 12,800 gallons
Click For Details
 
 
60103
60103
 
 
SI-1 Fuel System Cleaner - Bottle
15oz Bottles.
Cleans injectors, carburetors, valve and combustion chamber deposits with a concentrated blend of the most powerful high-temp and low-temp detergents available.
Cleans to nearly 100% efficiency in one treatment.
Reduces need for octane by up to two points.
Contains synthetic upper cylinder lubricant.
Cleans pollution control valves.
Use one bottle per tank for most effective treatment of neglected vehicle.
Also use in smaller doses for maintenance as one bottle treats up to 100 gallons.
Safe for continual use.
Same chemistry is also available in 4oz dosage as Complete Fuel System Cleaner for Motorcycles.
Click For Details
 
 
60101
60101
 
 
SI-2 Fuel System Cleaner
Complete Fuel System Cleaner in a 4oz bottle. Cleans to nearly 100% efficiency in one treatment.
Click For Details
 
 
80204
80204
 
 
Water Wetter - Bottle
12oz Bottle.
Unique agent for cooling systems that doubles the wetting ability of water.
Rust and corrosion protection allows for use of straight water in racing or reduced antifreeze levels in warm climates.
Improves heat transfer and reduces cylinder head temperature.
May allow more spark advance for increase power and efficiency.
Use one bottle for most passenger cars and light trucks, treats 3 to 5 gallons or 13.2 to 15.9 liters. Vehicles with larger cooling systems should use two bottles. Small cooling systems should use 1oz (3 to 4 capfuls) per quart.
Compatible with new or used antifreeze (including DEX-COOLTM and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems.
Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes
Click For Details
 
 
     
 
Total Record(s) - 13 ( page 1 of 1 ) [ 1 ]
 
 
1
Shop by Manufacturer
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
  Partners